Let’s discuss Swann camera troubleshooting. Like any other brand of Wi-Fi or IP camera for consumer-grade surveillance, you will come across common errors that you can solve easily in a DIY fashion. Refer to this guide for more details.
The Swann brand claims itself to be security made smarter. It backs up its claim by making some of the world’s best value security system. They’re able to compete against the likes of Ring, Nest, Arlo, Bink, and Wyze by providing the smartest of features and the most intuitive of controls.
Regardless, in case your Swann camera stops working, isn’t recording, isn’t connecting to Wi-Fi, or has issues with playback, “ Swann camera Troubleshooting – Problems and Solutions with Swann security cameras” got your back.
Swann camera not working: How to Fix
If your Swann camera isn’t turning on, check the wiring or battery. If it’s offline or has hampered function, disconnect the cameras, disconnect the power supply, and then restart to see if that fixes the problem. Your camera can also stop working if it’s overheated. Cool it down and try again later.
If worse comes to worst, your Swann camera might be “bricked” or rendered completely broken and non-functioning. If it’s still in warranty, you can get it replaced for free or at least get a discount for a replacement.
Swann camera not recording: How to Fix
If your Swann cam is not recording, it might be because recording is disabled. Go to “Main Menu” the select record. Fix “Record Setup” and “Motion Setup”. You can also set up the “Record Schedule” too.
Check “Motion Setup” to see if that’s the reason why your camera isn’t recording (it only records when it detects motion).
You can also connect one camera only to your DVR or NVR to see if that fixes the recording issues. You can setup an isolation test, cross-check the camera and cable, and interpret the results to narrow down the issue.
Swann camera not connecting: How to Fix
Check your router and make sure the Wi-Fi password entered is correct. Sometimes, your Swann camera might unsuccessfully establish connection with your router simply because you misread a character or capitalized the wrong letter (it’s case-sensitive).
The cam could also be out of coverage area of the router. Make sure the router and the camera(s) are close to one another to ensure a smooth connection.
If the camera is still have issues with Wi-Fi connection, reset or power-cycle your router and try again. It might be an ISP problem. If you believe the camera is in error, you can reset it back to factory settings using the recommendation outlined below.
Swann playback not working: How to Fix
To playback a video, tap the “Playback” icon, then the “Camera” icon, and then set a start and end date and time. You can also search recordings on the recorder below the calendar then tap “Start Playback”.
Sometimes, when you attempt to playback videos, you get blue lines to show it was recorded but get an “open failed” error message when you attempt to play it. This could be caused by bad configurations, lack of storage space, corrupted video files, and failing DVR components.
This could also root from the latest software update. It mostly affects iPhone users but even Android users are affected. Contact a Swann technician or consider replacement if the problem consists.
Swann camera black screen: How to Fix
Some Swann cam users experience CCTV cam black screen or a blank video at night. This might mean the camera lacks infrared night vision, especially if it continues to record and works fine during the daytime or if you put a lamp or light source where it’s supposed to record things.
Maybe you simply forgot to turn the IR on. Fix this by checking camera settings and enabling the infrared light. If that’s not the case, then the infrared night vision camera might lack an IR cut filter.
It could also have a faulty IR sensor. Either way, you might need to have the device fixed by a technician or replaced altogether depending on the severity of the damage or the state of its warranty.
Off-warranty products might require some repair and finagling from third-party repairmen but this means it’s now outside the jurisdiction of Swann.
How to reset Swann camera?
To reset Swann Camera models NHD-805/806/810/811/815/815AF/816/817/818/819, here’s how to go about it. Locate the reset button. You might need to use a reset key or a pin in order to press it for 10 seconds to start the reset process.
Disconnect the camera from the NVR first before resetting it. You’ll also need to remove it from the PoE switch or power adapter to turn it off completely. Some devices require a pin or cable key to access the small reset button.
FAQs – Frequently Asked Questions
Here are the most frequently asked questions in regards to the Swann cam.
Where is reset button on Swann camera?
On most Swann cams, the reset button is found on the bottom of the device. However, this might vary depending on the model. This button typically requires a needle or pin to push until you hear a click sound. You need to hold the button for 10 seconds to reset the device.
How to find Swann IP camera default password?
The default all-access admin password for Swann is “12345” on the username “admin”. To reset the password for cameras, NVRs, or DVRs, you might need to get the MAC address by downloading some sort of app.
Alternatively, you can reset the camera to default settings by pushing the pin-sized reset button for 10 seconds in order to get the default password back.
Swann DVR default password: How do I find my Swann DVR password?
If “12345” is not the password being used by NVR’s “admin” account and you’ve forgotten what the password is, reset it by downloading and installing the HomeSafe Config Tool first. Open the app, click on your device’s IP address, and note the MAC address.
Now, you can go to the login screen of the DVR, click on “Forgot Password”, and enter the MAC address provided to you by HomeSafe. Click “OK” when you’re done then set a new password.
Why have my Swann cameras stopped working?
You should check first that your camera power supply (or supplies) are properly connected to a wall socket or power strip. If you do have the power supply connected to a power strip, try a wall socket just in case the power strip is faulty or is a specialised unit that doesn’t have all the sockets active at all times.
How do I reset my Swann camera?
Disconnect the camera from the NVR (or from a PoE switch or a power adapter) to turn it off completely. Press and hold the reset button. While holding down the reset button, plug the camera back to the NVR (or to the PoE switch or a power adapter) and continue holding down the reset for 30 seconds, then release.
Why is my security camera black screen?
Some users experience CCTV camera black screen or video going black at night, it’s likely that the camera lacks infrared night vision, or the IR night vision camera doesn’t have an IR cut filter or a faulty IR sensor, or you simply forget to turn the IR on. Quick Fixes: Check camera settings to make sure the IR is on.
How do I get my Swann cameras back online?
All you need to do to get back online is to re-register the camera. Follow the steps below:First, go into the home interface (this is the screen it goes to when you start the app) and tap the “Camera” button on the bottom. On the next screen, tap the camera where it says “Camera is Offline”.
How long do Swann security cameras last?
Unfortunately, details aren’t provided for how long the Lithium Ion battery will last on a single charge, but it’s likely to be around 8-10 weeks based on our use. Obviously, if it’s not practical to take the device down every couple of months, then it may be worth investing in the solar panel accessory as well.
Why is the blue light flashing on my Swann DVR?
The first time you power up your camera, the camera LED will be blinking blue to indicate pairing mode.
Why does my security camera keep going offline?
Security cameras go offline for three main reasons: power outages, loss of internet, or failure of the camera’s components (broken parts or wires). Knowing some quick troubleshooting tips will help you get your camera back up and running in no-time.
What happens if you unplug a security camera?
When your house, the cameras won’t record. When you are away from the home, the cameras record. They’ll still be “working” but not recording.
What to do if all cameras display no image on the DVR monitor?
Is this an existing camera that was working and at some point had video loss? Follow these troubleshooting steps.
- Test Your Power Supply.
- Check Power Supply Box Fuses.
- Test Camera on a Different DVR Port.
- Use a Test Monitor.
- Use a Test Cable and Spare Power Supply.
Why is my Swann security camera not connecting?
Make sure that the connection is successful by checking your router and ensuring that your Wi-Fi password is correct. If the camera is still having issues connecting to Wi-Fi, reset the router and try again once it’s back up.
Why does my EUFY camera keep going offline?
Your Eufy camera goes offline if the battery has run out of charge, has lost connection to the HomeBase and Wi-Fi, or you need to update your Eufy app. You should check your battery and check the Wi-Fi settings to ensure that they are working correctly or reboot your camera to solve the problem.
Is Swann a Chinese company?
Swann has always been a leader. From humble beginnings in Melbourne, Australia the business now has offices in the USA, Canada, Australia, UK, Hong Kong and China and a presence in over 40 countries on 6 continents.
Can Swann cameras be hacked?
A popular wireless security camera designed to safeguard businesses and homes was vulnerable to a spying hack. The flaw meant it was possible to hijack video and audio streamed from other people’s properties by making a minor tweak to Swann Security’s app.
Are Swann 4k cameras any good?
The quality of the cameras are excellent. They feel, look and operate great. Simple setup and easy to use.
What does the blue light on my DVR mean?
The blue light indicates that the DVR (or other receiver) is outputting an HD signal. It could be the HDMI negotiation with your new TV causes it to stay on when the TV is off. If it’s too bright for you, a small piece of opaque tape is recommended.
What does it mean when Blink camera flashes red?
The Blink Video Doorbell flashes a red LED on the ring surrounding the doorbell button when it is seeking connection. During setup, and change of system or Wi-Fi, the red LED shows if the doorbell is ready to connect. If the red LED is not flashing as expected, remove one battery for five seconds and replace it.
What does a blue light mean on a camera?
LED setup reference guide
A flashing blue light on a security camera means you are ready for the WiFi protected setup.
Why do my wireless cameras keep disconnecting?
There are two main reasons that a camera may lose WiFi connection. It may be installed too far from your WiFi router, or it may not have sufficient bandwidth on your WiFi. Please contact our customer support for help in diagnosing this issue and confirming the cause.
Why won’t my security camera connect to my Wi-Fi?
Hold your phone in the location of your camera and check the number of dashed Wi-Fi coverage on your phone. If the connection is poor, if possible, reduce the distance between the camera and your Wi-Fi router. Consider a wired installation or consult your internet provider for solutions.
Why does my IP camera lost connection?
Surveillance Station may lose connection to your camera when the Internet connection is poor or if changes are made to bandwidth, firewall, or IP address settings.
How do I disable Swann camera?
How do I disable Swann camera?
- Yea, it’s possible to turn off the INTCAM manually.
- Try this procedure, using the button on the back of the cam –
- Press and hold the Pair button for 30 seconds.
- To turn it back on, just press the Pair button for a second, Don’t hold too long or it’ll go into pairing mode.
Will DVR still record if unplugged?
The Cloud will continue to record your set programs while the physical DVR is unplugged. You are also correct that if your additional TV boxes are unplugged, this will not affect your planned recordings.
How do I stop my security camera from being unplugged?
- Run your camera’s power cable behind furniture or shelving so that it’s harder to spot and unplug.
- Install cable clips to help keep the power cord attached to the wall. Check your local hardware store for availability.
How do you troubleshoot a security camera?
How do you troubleshoot a security camera?
- Know your login details.
- Check the power source (most cameras are PoE)
- Check to see if cameras work from inside or outside the network.
- Check the cabling.
- Reboot the system.
- Check for IP conflict.
- Check ARP tables.
- Update software & firmware.
Even though Swann isn’t as well-known as Ring, Arlo, or Nest, it has a significant share of the Wi-Fi cam market because it caters to a significant niche. Many people are curious how to troubleshoot this camera because they’re loyal Swann customers.
There’s great demand to know how to make sure their Swann devices work and operate smoothly. They also wish to know whether their Swann is broken or fixable in some DIY way.
- “Swann – Security Made Smarter“, Swann.com (U.S.), Retrieved February 24, 2022
- “How to reset IP cameras (for NHD-805/806/810/811/815/815AF/816/817/818/819)“, Swann.com Support, December 30, 2019
- “7450/8580 Camera Configuration“, Swann.com Support, February 1, 2020
- “HomeSafe Config Tool Password Reset (Windows)“, Swann.com Support, September 13, 2021
- “Swann 4/8 Channel Digital Video Recorder (Admin Password for Swann) PDF“, Swann.com Downloads, Retrieved March 13, 2022
- “Video Loss Troubleshooting for DVRs“, Swann.com Support, December 27, 2019
- “Swann Security Playback Issues on IOS“, Swann.com Support, July 25, 2020
- “Swann Wi-Fi Indoor Security Camera Troubleshooting“, iFixit.com, Retrieved March