How to Reset SimpliSafe Doorbell Camera?

Reset SimpliSafe Doorbell

How should you go about resetting the SimpliSafe Doorbell Camera? It’s the same as resetting the SimpliSafe camera or resetting any Wi-Fi security camera. Do it on the app or look for a reset button.

SimpliSafe or Simplisafe is a video doorbell and security camera brand that keeps you simply safe, as its name suggests. However, when it goes into error or glitches out, you need to know how to reset it in order to make it work for you. You don’t need a technician to do a reset.

How to Reset SimpliSafe Doorbell Camera

The common ways to reset your SimpliSafe Doorbell Camera includes the following.

  • Unmount and Plug-In: Unmount the video doorbell cam from its mount on your front porch or doorway. Afterwards, plug into its system the Android charger. Above the charger slot there should be a reset button.
  • Hold and Press the Reset Button: Use a paper clip, safety pin, or needle to hold the reset button for about 20 seconds or until the LED color changes from its default color to a yellow color.
  • LED Color and Reset Initiation: After releasing the button, the LED on the doorbell cam should change from yellow to white, indicating a successful reset. The reset has been initiated once the color becomes white.
  • Starting from Scratch: Mount the doorbell back to its bracket. Apply the required changes such as pairing your SimpliSafe App to your SimpliSafe Video Doorbell again. Do everything you needed to do when taking the device straight off the box.

Check for the Blinking White Light Prior to Reinstallation

If your video doorbell has a blinking white light when plugged into its mount, you can install it normally. Otherwise, another reset might be in order.  You can do a soft reset with the reset button by holding it for 10 seconds instead of 20 seconds.

Afterwards, you can then follow the normal installation instructions, which might include having to input a fresh new QR code from the app.

Using Your SimpliSafe Home Security App to Remove Your Doorbell

Open the SimpliSafe Home Security App on your mobile device—tablet or smartphone—and tap on the “Cameras” option. Go to the gear icon on the top right corner of your specific doorbell model, which should take you to its settings.

On the menu of “Camera Settings”, select the video doorbell you wish to reset then select “Remove Camera” at the bottom of the screen. After device removal is accomplished, you can resetar the setup process for your doorbell cam.

Challenges with the QR Code and Android Devices

Occasionally, the QR code method of establishing a camera and app pair-up is best done with an iPhone or iPad rather than an Android mobile device. If your smartphone is an Android, use the SimpliSafe Smart Home app to display the QR code on the screen and finagle with it a little.

If you’re having issues with the QR Code scanning, do the following.

  • Maximize the brightness of your smartphone and make sure it’s connected to the Wi-Fi.
  • Get a screenshot of the QR code to make it more vieweable to the doorbell cam.
  • Enlarge the QR code, put it on full brightness, then back away from the screen until your doorbell cam recognizes the code.

When Should You Reset Your SimpliSafe Video Doorbell?

You might need to reset your SimpliSafe Doorbell Camera if it malfunctions because of connection errors and whatnot. It’s like you needing to reset your Internet router when the Internet connection becomes spotty or resetting your PC when errors start occurring.

The cases and difficulties that require a SimpliSafe Doorbell Camera reset include the following:

  • The doorbell has disconnected to your Wi-Fi.
  • The SimpliSafe mobile app has been deleted, so you need to download a new copy and pair up the video doorbell with the freshly downloaded app.
  • The doorbell isn’t sending any notifications to you in case of motion detection while in night vision mode.
  • You’re experiencing random glitches, necessitating a reset.
  • Your app won’t connect to the SimpliSafe doorbell cam or other devices.
  • You’re reinstalling the SimpliSafe Doorbell Cam and it’s not working or connecting.

What Does the SimpliSafe Brand Bring to the Table?

SimpliSafe separates itself from the rest by actually alerting the authorities—policemen, firefighters, and medical personnel—in case of an emergency. This, on top of its 24/7 alarm-based monitoring, gives users even more peace of mind than your average Wi-Fi security cam.

The Simplisafe brand has a complete security lineup that mostly focuses on video doorbells and indoor cameras. This is unlike other companies that try to do everything and be everything, such that their offerings extend to wired systems, CCTV surveillance, alarm systems, and so forth.

A More Dedicated and Focused Company

SimpliSafe puts its money where its mouth is in delivering to you a customizable mix of wireless cameras and video doorbells, with video resolutions ranging from Full HD to Ultra HD. They can be hardwired solutions or wireless one dependent on your Home Wi-Fi.

Regardless, it meets industry standards for security, thus you can work with your Wi-Fi cameras and video doorbells from Simplisafe in a simply simple manner, using a single mobile app as your central control hub.

Instead of complicating your security, it simplifies things. You’re alerted when something is amiss and if you’re not around, the devices can go all the way to alerting the authorities on what could be a burglary or emergency situation.

Q&A

Where is the reset button on SimpliSafe camera?

If your camera is not currently connected to WiFi:

If not, you may need to reset your camera. You can do this by holding down the button on top of your camera for 10 seconds. You can then follow the normal installation instructions.

How do I reset my doorbell camera?

Doorbell Camera Reset

How do I reset my SimpliSafe doorbell pro?

Hard reset: press the large button on the back of your doorbell for 10 seconds before putting it back on the charging mount to reboot.

Can you reset a SimpliSafe camera?

To reset your SimpliSafe Camera, press and hold the reset button for approximately 20 seconds. Your device will then automatically reset. You can also unplug the device and then plug it back in. This will cause your device to turn off and then turn back on.

How do I reset my SimpliSafe outdoor camera?

If the battery is not the issue, you can try moving your Base Station closer to the camera and troubleshooting your WiFi connection. You can also try hard-resetting your camera by pressing and holding the button for three seconds.

How do I reconnect my SimpliSafe camera to WiFi?

Connecting to WiFi

  1. Select Cameras at the bottom of the screen.
  2. Make sure that your camera status light is flashing white.
  3. Name your Camera.
  4. Select your WiFi network.
  5. Tap the Get Your Code button.

How do I factory reset my Ring Doorbell?

Remove the doorbell’s faceplate then press and hold the reset button on the right side of the camera for 15 seconds. After releasing it, the ring light located on the front will flash a few times indicating the doorbell is restarting. The doorbell is now reset to factory defaults.

How do I reset my doorbell to see?

How do I reset so the doorbell or camera so it flashes red. Doorbell – Press and hold the rest button on the back of the doorbell until it chimes and flashes red, this could take up to 20 seconds.

How do I reconnect my Ring Doorbell?

Follow these steps to reconnect your doorbell or security camera wifi in the Ring App:

  1. Tap on the three lines on the top left.
  2. Tap Devices.
  3. Select doorbell or security camera you need to reconnect to wifi. The next screen is the Device Dashboard.
  4. Tap on Device Health.
  5. Tap on Reconnect to Wifi or Change Wifi Network.

Why isn’t my camera working on my ring doorbell?

The most common causes of not being able to do a Live View or see a recorded video are: A poor connection between your mobile device and the internet. A poor connection between your Ring device and your router.

Why is my video Doorbell not working?

Check to see whether another Wi-Fi device is having a problem connecting to the network. Unplug your router for 30 seconds and then plug it back in. See if your Ring Doorbell automatically reconnects. Turn off the power to your Ring Pro at the breaker box for 30 seconds, then turn it back on.

Why is my SimpliSafe camera offline?

There are two main reasons that a camera may lose WiFi connection. It may be installed too far from your WiFi router, or it may not have sufficient bandwidth on your WiFi. Please contact our customer support for help in diagnosing this issue and confirming the cause.

How do I update my SimpliSafe camera?

Bring your Keypad to your Base Station. Push the left side of the Keypad screen where the gear icon is located to prompt the Install menu. Select Install Update by pushing on the right side of the Keypad screen. Allow the system to install and reboot, which will take about 10 minutes.

How do I set up my SimpliSafe camera?

How To Install Simplisafe Camera

Why does my SimpliSafe camera keep blinking blue?

You can turn the LEDs off in your camera’s settings.What do the different colored LED lights on the camera mean?

LED BehaviorWhat does it mean?
Solid BlueConnected and shutter open, ready to record or stream
Blinking BlueCurrently being viewed live, or a video recording is taking place
Off (No Visible LED)Privacy shutter is closed or the LED has been disabled in settings

Why is my SimpliSafe camera not working?

Your camera is updating. Your WiFi network is down. Your camera has incorrect WiFi credentials. Your camera is too far away from the WiFi router to receive signal.

Why is my camera not connecting to WiFi?

Hold your phone in the location of your camera and check the number of dashed Wi-Fi coverage on your phone. If the connection is poor, if possible, reduce the distance between the camera and your Wi-Fi router. Consider a wired installation or consult your internet provider for solutions.

Why is my WiFi camera not working?

Reboot the device. Rebooting your security camera will release its cache to flush, re-calibrate the settings, and revise connections. Directly unplug the security camera from its power supply then wait for a few seconds before plugging it again. This will reboot it.

How do I reset my outdoor ring camera?

Ring Spotlight Cam Battery

  1. Find the setup button on the top of the camera.
  2. Press and hold the setup button for 10 seconds.
  3. The light on the front of the camera will flash for several minutes; when the light turns off the reset is complete.

How do I reset my ring doorbell from previous owner?

How to Remove a Ring Device from the Ring app, so a New Owner Can Use It

  1. Open the Ring app.
  2. Tap the three lines on the top left.
  3. Tap Devices.
  4. Select the device you want to release from your ownership.
  5. Tap Device Settings.
  6. Tap General Settings.
  7. Select Remove this Device.

Is there a reset button on ring doorbell?

To perform a hard reset, hold down the orange button for 20 seconds. After releasing it, the light on the front will flash a few times indicating that your Ring Doorbell is restarting. It may take a minute to fully complete this process.

How do I set up video doorbell?

How to Set Up Your Ring Video Doorbell | Ring

Why is my Ring camera offline?

Why Ring devices can go offline

You temporarily lose power. A wire in your router setup temporarily comes loose. You change your Wi-Fi network password. Your Ring device is suffering from low power due to a discharged battery.

Why is my Ring Doorbell flashing blue?

What does it mean when your Ring Doorbell is flashing blue? The constant flashing blue light on your doorbell indicates that it is charging. The circle fills up to show the increasing battery life. The light is solid blue when the battery is fully charged and will turn off when it is not charging.

What do I do if my Ring camera is offline?

Try removing and then replacing the internal battery. See if your Spotlight Cam automatically reconnects. Press the Setup button on the Ring device to put the device in Setup mode. Wait 10 seconds, then press it again and see if your Ring automatically reconnects.

Things to Remember

The SimpliSafe Doorbell Cam is a real-time home security device that works well with a network of SimpliSafe Cameras, thus giving you a whole home security system with built-in wireless and cellular connection. It alerts emergency services in case of intruders and features 24/7 alarm monitoring.

You can do a soft reset by pressing the reset button for 10 seconds instead of 20 seconds. It’s so you won’t have to pair up the doorbell cam to your app and Internet connection every time. Or you can do a hard reset using the reset button that requires setting up the camera from scratch.

References:

  1. How To Reset Simplisafe Doorbell Camera?“, How-to-Setup.com, February 24, 2022
James Core
I write dozens of helpful informational articles based on topics that I have identified again and again throughout my research and work experience. I am here to help you find the right home security products.

Leave a Comment

Your email address will not be published.