How to reset ezviz camera

How to reset ezviz camera

We are already in the poise of an enriched modern era where people are getting involved in more unlawful activities like the crime of stealing, arson, murder, kidnapping, shoplifting, and such that happens almost everywhere in uncertain times. And there is no way people will be blithe about it.

Thanks to the high-tech power of today, the Ezviz camera has been created, a security camera at your very own fingertips.

It has a lot of versions that go along from wire-free cameras, indoor and outdoor wi-fi cameras, door viewers, video doorbells, security light cameras, smart home appliances, and alarms and sensors. A complete package isn’t it?

Ezviz cameras were designed to provide a safe, convenient, and smart life for everybody. However, there may come a time that you will stumble upon some factory issues with your Ezviz camera that certainly needs a little resetting if it cannot be catered to by restarting.

You may also like: Home Security Camera: Everything You Need to Know to Make a Smart Decision

Why Reset?

 Sometimes, restarting is not enough to solve a problem with your device. It only closes and reopens the operating system wherein it doesn’t help in fixing things such as your WiFi connections and more. There are some cases that your device would malfunction and the best way to get rid of it is by resetting it.

The only problem is, resetting could be handy work. You need to set up your device again to be able to fix the issues. But the nice thing is that it will make your device look brand new.

Restart vs. Reset

 Restarting turns off your device, then reboots it without changing the settings. It is applicable in upgrading such device’s software and firmware, and if there is a major change to functionality.

On the other hand, resetting changes the settings of existing functionality. It puts the device setting software or hardware back to its original condition.

Reset Wire-free Ezviz Camera

For the wireless camera, the following are the steps on how to reset your device.

  1. Switch your camera on.
  2. Hold it and scroll up the black center of the camera.
  3. Use a screwdriver or any pointed object to lift up the rectangular form on the center.

Press the reset button for at least five to ten seconds.

reset ezviz camera
Reset ezviz camera
  1. Wait for the prompt informing you that the device has been reset successfully.
  2. However, wait for one to two minutes for the indicator light to flash blue.
  3. Generally, reset takes about one to two minutes.
  4. Just turn it back after the operation.

Reset Indoor Pan & Tilt Wi-Fi Ezviz Camera

Here are the steps to reset the Indoor Pan & Tilt Wi-Fi Ezviz Camera:

  1. Look for a small “Reset” button on the camera’s rear if you need to reset the device.
  2. Hold down the power button for 15 to 20 seconds until you hear the device confirm that the reset was completed. There may be a reset button in the Micro SD card compartment under the lens of some cameras.
  3. Rotate the lens bulb upwards.
  4. Locate the Reset button by opening the SD card container.
  5. Maintaining pressure on the reset button for 15 to 20 seconds until the device indicates that the reset has been successful

Reset Outdoor Wi-Fi Ezviz Camera

To reset the outdoor Wi-Fi Ezviz camera, do the following steps:

  1. Hold your camera then scroll up the black center of the camera.
  2. Use a screwdriver or any pointed object to lift up the rectangular form on the center.
  3. Press the reset button for at least 10 seconds.
  4. A voice will come out if it is successfully reset.
  5. A red light will also appear on the motorized pan.

Frequently Asked Questions

Why is my EZVIZ camera flashing red and blue?

The flashing of red and blue on the Ezviz camera indicates that it is ready to connect to the Wi-Fi.

Why is my wired EZVIZ beeping?

The beeping indicates that there is an issue with the DVR’s setup, which is why it is making this noise. A beeping or alert noise will be made by the DVR if the cameras and the DVR are not using the same standard of output. The “Input/Output Video Standard Mismatch” error type deals with this problem.

How do I download the EZVIZ app?

For Android devices, go to the Google “Play Store” and download the app. Look for the “EZVIZ” app in the App Store. Then simply install the app on your device.

If you’re using iPhone, go to the ‘APP store’ and look for the “EZVIZ” app in the App Store. Simply install it and open it up.

The Bottom Line

Resetting with Ezviz Camera is very easy and smooth. You don’t have to do it any other way instead of tapping on the buttons. Although the Ezviz camera has a lot of different versions, the procedures are still common with each other. Besides its convenience and comprehensible steps, it is also user-friendly to all kinds of users.

Just bear in mind that with this activity, you enable your device to forget everything. It was like experiencing amnesia but could not regain its memory ever again. You need to do another setup for a freshly reset device as a part of the process.

James Core
I write dozens of helpful informational articles based on topics that I have identified again and again throughout my research and work experience. I am here to help you find the right home security products.

Leave a Comment

Your email address will not be published. Required fields are marked *